이제 부팅이 진행되실텐데 종료 키+볼륨-하 키를 꾹~ 눌러주시면 리커버리 모드에 진입합니다.
리커버리 모드에 진입된 상태에서 아래 메뉴를 순서대로 들어가 주시면 됩니다.
ο Zen Menu -> οOpen Recovery Script ο Full_Format__Nand_Bada_For_Android.ors를 선택, ! 해당 스크립트는 내장된 바다 OS 파티션을 포맷하고 안드로이드 시스템 구축을 위해 파티션을 재구축하는 스크립트입니다. 기존 바다 OS가 삭제되므로 주의하시기 바랍니다. ο Wipe Data/ Factory-Reset -> ο Clean to install a new ROM! ! 위 과정중 Error mount ~와 관련된 오류가 나시는 분들은 별도로 문의 바랍니다.
(재부팅 후 다시 시도해보시는 것도 잊지 마세요~)
5. ZenDroKat 설치
위 과정이 "이상없이" 끝나셨다면 이제 아래 과정을 진행해 줍니다.
οBackup And Recovery
οRestore From /storage/sdcard0 (여기서 명칭이 다를 수 있음!)
ο2014-04-26.17.23.33_9-20140327-UNOFFICIAL-wave
οRestore
-> 여기까지 하시면 복원과정이 실행됩니다. 시스템 복원이 이상없이 끝나면 다음으로, 문제가 발생하셨으면 처음부터 다시 시도합니다.
첨가 : ZenDroKat 추가 문의는 링크(ZenDroKat 채팅) 또는 댓글 남겨주세요.
3. Installation of ZenDroKat:
Now shut down your WAVE, BUT leave your SD card in your device. When device is powered off, enter CWMRecovery by pressing END CALL & HOME (middle button). This may take a moment.
When you are in Recovery mode, you’ll find the following options:
Reboot System Now
Install Zip
Wipe Data/Factory Reset
Wipe Cache Partition
Backup and Restore
Mounts & Storage
Advanced
Zen Menu
Kernel Options
For NAND installation choose “Zen Menu” and “Open Recovery Script” and confirm your choice by pressing HOME button. Now you’ll find several scripts. Choose “Full_Format__Nand_Bada_For_Android.ors”.
CAUTION: THIS WILL WIPE YOUR BADA INSTALLATION COMPLETELY!!!!!
For SD installation do NOT choose this script. You will have to partition your SD card. This depends on size and speed of your SD card. When you choose SD installation, you also can move clockworkmod folder and zImage to SD, when you’re in recovery mode. For that, choose “Mounts & Storage” and “mount sd”.
DO NOT TURN OFF OR REBOOT YOUR DEVICE IN THAT STATE!!!!
When script has finished or sd is partitioned and prepared with files go back by pressingEND CALL. Please check in “Kernel Options”, if “MD5 check” is activated!
Now go to “Wipe Data/ Factory-Reset” and choose “Clean to install a new ROM!” Your phone will be wiped completely. Please choose also “wipe cache”, when there are problems while restoring.
When there are some problems during wiping device, please go to “Mounts & Storage” and choose “format /system” & “format /data”. Now your device is ready to restore Android on your phone.
Go to main menu and choose Backup & Restore”. Next option to choose is “Restore from /storage/sdcard0″.
Something like “ 2013-11-17. 19. 13.22_aosp_wave-userdebug_4.4_K…” should be listed (here it’s for AOSP-ROM). Choose this entry and confirm. Restoring the system may take some time! So please be calm and patient! When something goes wrong, you have to restore element by element with option “Advanced Restore from /storage/sdcard0″. But don’t restore cache!
Well… Now the core of the ROM is installed…
4. Install patches:
Mostly it is necessary to install some patches.
For that, go back to main menu and choose “Install Zip” und “Choose zip from /storage/sdcard0″. Now choose every required patch (ZIP) one by one. When you have installed all patches it is time for the first boot.
Go back to main menu and choose “Reboot System Now”. It maybe required to confirm root. Confirm “Yes – Fix Root!”.
Your phone will reboot automatically! First boot of your device may take up to 5 minutes. Do NOT interrupt boot process!
When installation is done, you’ll be asked for PIN code or led automatically to home screen.
Congratulations! You have successfully installed Android “KitKat” on your WAVE smartphone!
BOOT NAND.zip
MultiLoader V5.67.exe
zImage_NAND